Report item
Item specifics
  • Use: Vehicles & Remote Control Toys
  • Technical parameters: Value 2
  • For Vehicle Type: Airplanes
  • RC Parts & Accs: Connectors/Wiring
  • Material: Plastic
  • Plastic Type: ABS
  • Model Number: VMKM17512
  • Upgrade Parts/Accessories: Power distributon board
  • Four-wheel Drive Attributes: Power distributon board
  • Tool Supplies: Power distributon board
  • Remote Control Peripherals/Devices: Power distributon board
Product Description

Matek HUBOSD eco X/H Power distributon board HUB OSD PDB CURRENT SENSOR

eco X Power distributon board:

Features:

Dual BEC X Type
The HUBOSD8 has been engineered to provide the highest possible performance and reliability in a 4 layers PCB.
It is a multifunctional HUB with PDB, BEC 5V/2A &12V/500mA, Current sensor 140A, STOSD8.
The BEC 12V is linear regulator, no LC Filter needed.
Built-in STOSD8 can support Plug & Play, no complicated settings needed.
It is specially made for the mini FPV Quad.
 
Specifications:
General:
In: 8-21VDC (3-5S LIPO)
PDB: 4 X 30A (MAX. 4 x 35A)
BEC: 5V/2A, 12V/0.
Color: blue
Size: 51 x 35 x 4mm/2 x 1.38 x 0.16 inch
Package size: 146 x 90 x 5mm
Net weight: 15g
Package weight: 21g
 
PDB: (ESC outputs)
Continuous current: 30A per output
Peak current (10 seconds/minute): 35A per output
 
Physical:
2oz copper, 4-layers &1.6mm PCB.
1x Battery input, 4x ESC outputs. 2x BEC 5V outputs, 2x BEC 12V outputs.
Camera signal & Gnd pads, Video Transmitter Signal & Gnd pads
1x Serial port (RX, TX, G)
Mounting holes 30.5mm square spacingΦ3mm
 
BEC 5V (outputs)
Designed for RC Receivers, Flight controllers, OSD, and Servos.
DC/DC synchronous buck regulator.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant (5 seconds/minute)
 
BEC 12V (outputs)
Linear regulator, very low noise. LC Filter is needless.
Designed for Video TX or FPV camera.
Voltage: 12.0 +/- 0.3VDC (4-5S operation)
Continuous current: 500mA@16V IN, 400mA@20V IN
Short-circuit tolerant (2 seconds/minute)
If the battery is 3S LiPo, Output voltage=3S LiPo voltage - 1V
 
Current Sensor
140A
If current >140A. STOSD display 140A
 
STOSD-8
1) Running indicator
Blue LED blinks: STOSD is initializing
Blue LED light: STOSD is working.
2) Autodetect PAL/NTSC
Auto sense PAL / NTSC cam at OSD startup. Default is NTSC without Cam signal
3) Dynamic on screen info
Current < 2A & keep 5 seconds
Current > 2A
4) Min.Volt & Max.Amp recorder
5) Automatic flight timer
Current > 2A, Time in.
Current < 2A,Time out.
6) Auto battery cells detection
If the Input voltage is in the range of following, The HUBOSD will detect the cell
numbers automatically.
11.1-13.05V: 3cells LiPo, 14.8-17.4V: 4cells LiPo, 18.5-21V: 5cells LiPo
If the input voltage is out of the range. The voltage value will blink on screen.
Pls check if the battery total voltage is below 3.7V*cells
7) Low vlotage alarm
(Value blinks): Default 3.6V* cells
8) Exceeding mAh alarm
(Value blinks): Default 1000mAh
9) Onscreen Pilot ID
Default is disable. you can type some words & enable it in GUI
10) Firmware upgradable
Voltage precision: +/- 0.4%, Voltage resolution: 0.01V
Current precision: +/- 1.5%, Current resolution: 0.1A
 
Package included:
1 x Dual BEC OSD Distribution Board
1 bag of accessories    

VMKM17512-ALL-100-1VMKM17512-D-600-1VMKM17512-D-700-1VMKM17512-D-1300-1VMKM17512-D-1600-1VMKM17512-S-200-1VMKM17512-S-300-1VMKM17512-S-500-1

eco H Power distributon board:

Features:

Dual BEC H Type
The HUBOSD8 has been engineered to provide the highest possible performance and reliability in a 4 layers PCB.
It is a multifunctional HUB with PDB, BEC 5V/2A &12V/500mA, Current sensor 140A, STOSD8.
The BEC 12V is linear regulator, no LC Filter needed.
Built-in STOSD8 can support Plug & Play, no complicated settings needed.
It is specially made for the mini FPV Quad.
 
Specifications:
General:
In: 8-21VDC (3-5S LIPO)
PDB: 4 X 30A (MAX. 4 x 35A)
BEC: 5V/2A, 12V/0.
Color: blue
Size: 45 x 35 x 4mm/1.78 x 1.38 x 0.16 inch
Package size: 146 x 90 x 5mm
Net weight: 12g
Package weight: 17g
 
PDB: (ESC outputs)
Continuous current: 30A per output
Peak current (10 seconds/minute): 35A per output
 
Physical:
2oz copper, 4-layers &1.6mm PCB.
1x Battery input, 4x ESC outputs. 2x BEC 5V outputs, 2x BEC 12V outputs.
Camera signal & Gnd pads, Video Transmitter Signal & Gnd pads
1x Serial port (RX, TX, G)
Mounting holes 30.5mm square spacingΦ3mm
 
BEC 5V (outputs)
Designed for RC Receivers, Flight controllers, OSD, and Servos.
DC/DC synchronous buck regulator.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant (5 seconds/minute)
 
BEC 12V (outputs)
Linear regulator, very low noise. LC Filter is needless.
Designed for Video TX or FPV camera.
Voltage: 12.0 +/- 0.3VDC (4-5S operation)
Continuous current: 500mA@16V IN, 400mA@20V IN
Short-circuit tolerant (2 seconds/minute)
If the battery is 3S LiPo, Output voltage=3S LiPo voltage - 1V
 
Current Sensor
140A
If current >140A. STOSD display 140A
 
STOSD-8
1) Running indicator
Blue LED blinks: STOSD is initializing
Blue LED light: STOSD is working.
2) Autodetect PAL/NTSC
Auto sense PAL / NTSC cam at OSD startup. Default is NTSC without Cam signal
3) Dynamic on screen info
Current < 2A & keep 5 seconds
Current > 2A
4) Min.Volt & Max.Amp recorder
5) Automatic flight timer
Current > 2A, Time in.
Current < 2A,Time out.
6) Auto battery cells detection
If the Input voltage is in the range of following, The HUBOSD will detect the cell
numbers automatically.
11.1-13.05V: 3cells LiPo, 14.8-17.4V: 4cells LiPo, 18.5-21V: 5cells LiPo
If the input voltage is out of the range. The voltage value will blink on screen.
Pls check if the battery total voltage is below 3.7V*cells
7) Low vlotage alarm
(Value blinks): Default 3.6V* cells
8) Exceeding mAh alarm
(Value blinks): Default 1000mAh
9) Onscreen Pilot ID
Default is disable. you can type some words & enable it in GUI
10) Firmware upgradable
Voltage precision: +/- 0.4%, Voltage resolution: 0.01V
Current precision: +/- 1.5%, Current resolution: 0.1A
 
Package included:
1 x Dual BEC OSD Distribution Board
1 bag of accessories

VMKM17506-ALL-100-1VMKM17506-D-700-1VMKM17506-D-800-1VMKM17506-D-900-1VMKM17506-D-1000-1VMKM17506-S-200-1VMKM17506-S-300-1VMKM17506-S-500-1

 

 

Shipping:

Item location is at China, default shipping service is shipping by China register Air

Mail or HongKong register air mail
Please be advised that International shipping usually take longer than domestic, as it\'s based on shipping service provider and customs.
All items will be shipped within 1-3 business days upon receipt of payment (except Saturday ).
 
Asian countries 5-15days
UK, Ireland 10-20days
US,Canada,Australia 8-20days
Spain, Greece, Germany&western european countries 10-21days
France, Italy&other countries 15-28days
 
 
If the package weight is more than 2kg or the package size is larger than 90CM, we will use EMS etc or Ship with two parcels by China post air mail.
Instruction:the weight and size we marked in the package details is not the actual weight and size of the goods, if you need to know the actual weight and size, you just need to contact us.
 
Payment:
1. ESCOW
2. Moneybook
3. Bank transfe
Returns:
  • For ensuring all the items are in good quality, we will test all products before the packages were sent out .
  • 30 days warranty from the purchased date. Please contact us via email before returning the defective item.
  • Return items should include the original packaging and all accessories.
  • Only defective product will be offered exchange.

 

Packaging Details
  • Unit Type: Set
  • Package Weight: 0.04kg (0.09lb.)
  • Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
Shipping
Calculate your shipping cost by country/region and quantity.
Quantity: Ship to:
Packaging Details
  • Unit Type: Set
  • Package Weight: 0.04kg (0.09lb.)
  • Package Size: 10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
Payment
We support the following payment methods. All payments made on AliExpress are processed by Alipay.